Grundig CCTV-Kamera GCI-H2812W, 2MP, PoE

Spezifikationen Grundig CCTV-Kamera GCI-H2812W
Image Sensor 1/2.7" CMOS, 2 Megapixel Pixels - Total 1920(H) x 1080(V)
Sensitivity Colour 0.6 Lux F1.8(IRE50), 0.1 Lux F1.8(IRE30)
Lens Focal Length 3.6 mm Viewing Angle 88°
Iris F-Number F=1.8
Digital Zoom Off ~ 8x
Shutter Speed 1 sec to 1/10,000 sec
AGC Off, 1~3(Auto) or 1~9 (Manual)
WDR D-WDR (Digital wide dynamic range)
BLC: Back Light On/Off
White Balance ATW, AWB,
Manual Privacy zones 5 zones, rectangle
Motion Detection On/ Off/ Sensitivity/ Area setting Tampering Alarm On/Off
Digital Noise Reduction (DNR) Off, 3DNR Low/Middle/High, SPQ+3DNR
Reverse Flip, Mirror,
Vertical Mode (90°clockwise,90° counter clockwise), 180° Camera
OSD Yes, multi language
Alarm Event Motion Detection or Schedule: Image transfer or alarm message by FTP, Image transfer or alarm message by E-mail, recording on SDcard and send HTTP notification
SD memory supports up to 32 GB
capacity of micro SD/SDHC memory
Video Compression H.264 (MPEG-4Part 10/AVC), MJPEG Video Streaming Quad stream: 4xH.264 or 3xH.264+MJPEG Triple: 3xH.264 or 2xH.264+MJPEG Dual: 2xH.264 or H.264+MJPEG Single: H.264 or MJPEG
Video Resolution max.:1920x1080(25 fps)+720x576(25fps), 2x1920x1080(13fps), 1280x1024(25fps)+1280x1024(13fps)
Network Protocol IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, DHCP, PPPoE, UPnP, SMTP, ICMP, IGMP, SNMP, IEEE802.1x, QoS, ONVIF, ARP ONVIF compliant Profile S ver.13.12
Firmware Upgrade Firmware upgrade by Web Browser Configuration Upload & Download configuration on remote PC
Input/Output sockets RJ-45, Micro SD Card Slot Network Interface 1x RJ-45 10/100Mbs Audio Inputs built-in Microphone
Web Browser MS Internet Explorer 6.0 (or higher), Firefox, Google Chrome, Safar
Alarm Event Motion Detection or Schedule: Image transfer or alarm mess
Operating Temperature 0°C ~ +50°C
RoHS Compliant
Supply Voltage PoE IEEE 802.3af
Power Consumption 3.5 W
Weight 0.18 kg
Dimensions (wxhxd) Ø 117 x 50 m
Die Kamera war auf einer Demotafel montiert und war nur zwecks Vorführungen in Betrieb.
Idealerweise als Ersatzteil in einer Bestandsanlage einsetzbar.
Keine Rücknahme und Gewährleistung.
Mehrwertsteuer inkl., ausweisbar.