100 ml Silberelektrolyt 30 Gramm/Liter - Betzmann Galvanik:

Produktinformationen "Silber - Silberelektrolyt 30 G. /L."

100 ml Silberelektrolyt von Betzmann Galvanik:

Dieses Silber ist ein völlig Cyanid freies Produkt. Es beschichtet eine helle Silberschicht und kein
langweiliges Grau. Sie können damit Silberware neu versilbern oder auch kleinere Kratzer oder
Flecken auffüllen. Von Antiquitäten bis hin zu Elektrokontakte ist alles möglich.

Gehalt: 30 Gramm Silber pro Liter
Entspricht 170,-- € Pro Liter
Auch in anderen Gebinde von 50ml,100ml,250ml,500ml,1000 ml erhältlich.
Siehe Shop!

Silver:
Our silver is unique in its design and development. Real Gold has developed a silver brush plating solution that is totally free of cyanide. It Plates bright and not dull grey as is usual with these solutions. This alleviates the requirement for post-plate polishing. Our new formulation also fills in minor scratches which also saves a great deal of time in preparation. With this low-hazard silver plating solution, you will be able to plate everything from antiques through to electrical components. It also has a very long shelf life.


Operating Conditions and Deposit Data

Voltage 2.5 – 3.5 volts
Plating rate 1 micron per minute (spot)
Temperature 15 – 25 °C
Electrode Silver, Platinum or Carbon
Silver content in plate 99.8% (balance carbon)
Lightness (L*) of deposit 90 – 93 (Cielab)
Hardness 251 Hv
Density of deposit 10.4 g/cm3
Stress Medium
Special storage requirements Away from sunlight
Shelf life 1 – 2 years
Health and safety classification Irritant
Special considerations None (cyanide-free)
Transport (UN number) None: Not classified as dangerous for transport


Features Used for
Quickly builds up a thick, bright layer Silver plating a wide range of items such as silver plated antiques (no need to remove all the old silver plate – just prepare the surface with our MPU and re-plate the areas that have worn away);
Silver plating electrical components to increase conductivity.
Reduces the requirement for polishing both before and after plating. Can be used as a barrier layer for copper and copper containing alloys and gold when plated to a 3 micron thickness.
Cyanide free Great for using in schools and colleges as it’s low hazard


Kennzeichnung gem. CLP-VO:

GHS07

Symbolwort:Achtung!

H302 Gesundheitsschädlich bei Verschlucken
H315 Verursacht Hautreizungen.
H319 Verursacht schwere Augenreizung.
P261 Einatmen von Staub/Rauch/Gas/Nebel/Dampf/ Aerosol vermeiden.
P280 Schutzhandschuhe/Schutzkleidung/Augenschutz/Gesichtsschutz tragen
P305 + P351 + P338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.